Drains and clogs in Bellevue and Eastside homes
Drain problems in a Bellevue home cluster around four patterns: kitchen drains backed up by grease and dishwasher discharge in the 1.5-inch line, recurring main-line clogs in pre-1980 cast iron and Orangeburg laterals, the cedar-root sewer intrusion that defines Eastside drain service, and homeowner damage from chemical drain cleaners that corrode the very pipes they're meant to clear. This section covers when a hand auger fixes it, when hydro-jetting is the right call, when a sewer camera should run first, and what to keep out of the drain in the first place to avoid the cycle.
Drains and clogs
Hydro jetting vs cabling in Bellevue: which one actually fixes it (and which one is overkill)
Cabling is $189 to $345. Hydro jetting is $595 to $1,200. Here is when each is the right call, why pipe age changes the answer, and the red flags in a Bellevue quote.
Read →Kitchen drain clogs in Bellevue: grease, FOG, dishwasher discharge
Kitchen sink keeps backing up in your Bellevue home? Here is what FOG actually does in horizontal drain runs, when enzymatic cleaners help, and when cabling is the answer.
Read →Recurring drain clogs in older Bellevue homes: cast iron and bellies
A 1965 Bellevue home does not clog the same way a 2005 one does. Cast iron interior, settled bellies, undersized venting — here is the real structural cause and what to do.
Read →What Drano and other chemical drain cleaners actually do to Bellevue pipes
Drano heats to ~200°F as it reacts. In a partially-blocked pre-1980 Bellevue pipe, that heat concentrates in one spot. Here is what happens, and what to use instead.
Read →